Resolved Issues
Last updated
Last updated
MAC Address getting changed for cig_196 APs in Scale Test Bed when firmware image upgraded.
The Gateway logs are pointing to old Radius server even after pushing new RADSEC configuration multiple times
Possible race condition on Telemetry Socket shutdown
Blacklisting a device does not work.
Captive Portal is not working with multiple SSIDs
Final redirect URL parameter in captive portal prevents configuration on the AP
EAP101: "Failed to add station" and "Failed to add peer" messages in dmesg output
Rate limiting and Rate limiting with radius are not working as expected for multiple clients
Rate-Limiting is not working - Firmware TIP-v2.6.0-4c21f5c
Option "Icons" is missing in passpoint section in Prov UI
One Time local provisioning DNS problems
EAP101: bssid assignment has changed between v2.6.0 to v2.7.0-rc2
The RADIUS Requests by the gateway are directed towards wrong RADIUS Server, when IP is configured is valid in the AP config but does not match the pool
Unable to push the RADSEC config in the gateway through Open API
In Advanced Captive radius user/pass mode, an error is seen when the credentials are given in the Captive Portal
Gateway Service: Devices and device status in dashboard are showing inaccurate data
owgw randomly crashed
Interop:Unable to get Reports of interop sanity due to "Error:Can't upload artifacts"
MAC format field is affecting the Captive Portal page
External captive portal session timeout issue (Getting internet even after completion of time)
rtty quits if a long data block is returned during a command
LastFWUpdate value not updated on devices
ucentral "perform" command not working
Memory leak when connecting the UI to the GW. WebSocket memory not being freed.
GRE Tunnel goes down after applying the configuration
QoS mapping doesn't happen between wired and wireless captures
HFCL_ion4xi does not connect on 5GHz radio with iPhone12 in open air
Station data mis-alignment between ucentral-schema/renderer/wifi/station.uc and ucentral-schema/state/interface.ssid.association.yaml
Multicast traffic is not appearing on the wireless side
Requesting improved & more accurate wlan-cloud-ucentralgw compilation instructions
Client IP Address not available
WF196: Clients wont get connected to 5G radio randomly.
Client details not available for MPSK with VLAN
Remote MPSK - AP Sends Access-Request indefinitely when receiving Access-Accept that does not contain the Tunneled-Password attribute
Prov UI: In quality of service required configuration fields are not specified
hfcl ion xe is failing on multipsk as vlans are not seen tagged for the clients
bind-dig Utility needed to execute the /usr/libexec/naptr_lookup.sh script for Radsecproxy dynamic discovery
Hostapd radius_das_client parameter set via SSID "hostapd-bss-raw" is not set properly in hostapd-phyx.conf
HE informations and other IE information for Tag id (255) are missing in the Scan output for neighbor AP's
Starting RTTYS session may cause GW to crash
Gateway service: Failed to fetch the data on WIFI-Scan
Wifi-6E SSID are not getting applied unless same code is pushed multiple times
Kafka topics should be created during initialization
Unable to open RTTY session when user clicks on "Connect" button
Gateway Restart due to memory increase.
Wallys AP gone to continuous reboot state during sanity execution
OWE:In Packect captures, for OWE Transittion mode two SSID's are being displayed with same SSID name.
In the OWE Transition mode, the OWE SSID is not hidden as per expectation
Prov UI: Error is shown when any radius based configuration is pushed with secret key less than 8 characters
Gate way service: Telemetry is not seen in command history
Gate way service: filter is not functioning in Wifi-Scan
Prov UI: account page avatar deletion is not working
rtty does not work
Prov UI: Error showing up when pushing Uchannel config
Gate way service: Unable to see packet captures for Trace command in Packets type.
AP is delaying to send FT response(Action frame) over the DS
OWE is not working for 6g configuration
Multicast traffic is converted to unicast by AP though multicast to unicast option is disabled
Unable to see any Info under owrrm in Prov UI
Prov UI: "Error Fetching Analytics Board" error is showing up when we navigate to Venue
Prov UI: "Error Fetching System" error is showing up when we navigate to system
Hfcl_ion4: AP is getting into disconnected state frequently
No error is shown for Multi-PSK configuration with WPA3 security
GW UI: better error catching/displaying when receiving corrupted device statistics
Prov UI: configuration JSON shown on configuration page should not contain PROV specific information
Port Forwarding is not valid option on any upstream role - Prov is setting an empty array as default
Analytics may not update the device list if the venue is modified
GW UI: wifi analysis network diagram not showing all associations
AP is switching to 20Mhz on 2.4Ghz when we push a config with channel mode HE
hfcl ion 4xi : SSID on 5Ghz is not getting broadcasted sometimes when we apply config
GW seems to become increasingly unresponsive under multiple simultaneous WIFI Scans.
Client Internet Issue with proxy_arp (from /etc/config/wireless)
6g SSID is not able to scan in the Wifi 6E (cig_196) AP
Hfcl_ion4xi: AP doesn't responding the authentication response as well association response
Add support for MeshPlusPlus Devices
802.11r roaming fails due to Invalid PMKID auth frame from AP for WPA3 SAE
Gateway showing wrong APs Status
ANQP ID is not present in the Beacon frame and Probe response.
Captive Config prevents broader config update to a device fails
Provisioning rejects "third-party" section in config
Prov UI: "could not retreive owrrm system information" error is showing up when we navigate to system
If no other APs are on the same channel as the OWF AP, then the algorithm is not keeping the OWF AP on the same channel.
ucentralgw-ui does not handle expired oauth tokens
Even though there are free non over lapping channels available in 2G AP is choosing overlapping channels in random Optimization
When we are considering 3 OWF APs in same venue and running with any of the optimization one AP 5G channel info is missing
Stations are not able to connect for multiple 6G SSIDs other than the first Transmission SSID
Unable to disable the Multiple BSSID for 6g.
Max BSSID Indicator in Multiple BSSID is showing wrong value.
DTIM count is high for the Non-Transmitted BSSIDs in the Multiple BSSIDs
Wifi scan report is going into pending state after running Open RRM API for (903cb3bd732d) edgecore_eap102
After upgrading the AP to latest Firmware image, the configuration is not applying on the Ap.
Missing RRM service in the system info tab of prov UI
Captive Portal is not working on latest firmware images.
Gateway is getting restarted after pushing radius gateway proxy configuration on any AP
Provision entity not exist.
Unable to fetch the devices in gateway- qa01
EAP101: Fail to upgrade FW from 2.6 to other version
Wifi-6E (Cig_196) AP is switching to 80Mhz on 6Ghz band when we are pushing a config with channel mode HE
Firmware upgrade is not happening due to multiple wifi scans are in pending state in AP
FILS Discovery Interval option is not giving the expected results
OWLS: health and stats timers are not consistant
RRM Service in webui does not show details
Missing radio info in WIFI scan which effecting RRM testing
When we are pushing WPA3 .1x config but we are getting WPA2 .1x as output
Wally_dr40x9 AP is unable to come out of U-Boot
Prov UI: Device MAC / Serial ID should not be case sensitive
Unable to run station to station traffic on CIG 188n and EAP 102 on latest firmwares, working on images below TIP-devel-6693127
Unable to trigger commands(Firmware, wifiscan and reboot) from gateway
Unable to Upgrade the Firmware on Hfcl_ion4xi (Basic-04) AP
After Client getting connected to the SSID, the correct value of station count is reflected after many beacons
Udaya_a5_id2 AP went Bad State during Sanity
Hfcl_ion4xe: AP not have redirector.json file
Gateway service: Unable to push the default config to the selected APs from the gateway
Unable to see channel change reflects on AP after channel Optimizer run
Gateway is getting unresponsive: WebSocket hang-up error
prov service: unable to create venues or sub venues under the entities
Unable to see any date after running TCP measure_ap_ap Algorithm
Unable to access the Advanced-03 Testbed
Client IPv4 addresses not available for non MPSK and MPSK clients
Filters are not working in multiple API GET requests
IPv4_addr not available in associations section of the state packet
In GW showing ui of AP for any random msg instead of particular mac address
Prov UI: custom RRM should allow for more than one algorithm
Observed similar RSSI values are populated for an AP with and without TPC algorithm
There is no change in TX power observed from 2G radio in TCP algorithm scenario
Provision service : IPv4 Address is not displayed in client life cycle
Provision UI: DHCP snooping is not available in the services under interfaces
No error is shown for Multi-PSK configuration with WPA3 Enterprise and OWE security
OWLS does not populate the clients state message
GW Must block simultaneous command execution for same device
Station gets the IP in a VLAN subnet though the user credentials are not defined for that VLAN in Radius - Dynamic VLAN
Prov UI: not all wifi client MACs are available
GW UI: not all commands notifying users with API responses
Unable to see extra Roaming consortiums in ANQP response
Gateway is reflecting Incorrect APs Status (AP is in Disconnected state but gw shows as connected)
GW UI: device statistics is showing error when there are no statistics available
Cig_wf194c4 (Basic-08) AP is unable to respond through gateway
Gateway service: GW gets restart when the timeline of statistics is modified
Observed SSL Error followed by Multiple GW restarts
FMS Does not start after fix
No response for wifiscan
Unable to push Open roaming configuration as Radius auth and accounting ports are greater than 4050
Prov UI: Unable to configue hessid through Prov UI
When we import the configuration with wpa3-mixed security mode, the proto is showing none in Prov UI
2.7.0RC2 Micro services may restart
RRM service is getting restarted frequently