OpenWiFi
2.2.0
2.2.0
  • OpenWiFi Release 2.2
  • Ordering OpenWiFi APs
  • Getting Started
    • Cloud Discovery
      • Discovery without Cloud
    • Release 2.0 SDK
      • Deploy using Docker Compose
      • Deploy using Helm
    • Access Points
      • Local Device Settings
  • Provisioning
    • Data Model Introduction
    • Creating a Configuration
  • User Interface
    • Devices
      • Commands
      • Statistics
      • Command History
    • Firmware
  • API
    • OpenAPI Definitions
  • Monitoring
    • ELK Integration
  • Configuration Examples
    • Basic Device Provisioning
      • Bridge Mode SSID
      • NAT Gateway Mode SSID
      • Multi-VLAN SSID
    • Device Feature Configuration Examples
      • DHCP Relay
      • Services
      • Metrics
      • GRE
      • L2TP
      • VxLAN
      • WDS
      • Mesh
      • Captive Portal
        • External Captive Portal
      • ExpressWiFi
      • Roaming RRM and SON
      • RADIUS Authenticated SSID
        • Dynamic VLANs with RADIUS
      • Multi-PSK (MDU Shared Key)
      • Dynamic Air-Time Policy
      • Passpoint®
        • Configuration Introduction
        • Advertising Services
        • Passpoint® Configuration
      • Switching
        • Port Speed
      • P4
Powered by GitBook
On this page
  1. Configuration Examples
  2. Device Feature Configuration Examples
  3. Switching

Port Speed

OpenWiFi 2.1

Configuring port speed and operation is most commonly done with PoE access switches however the same configurations are possible for all OpenWiFi device types.

By default all ports attempt 1,000 Mb/s full duplex operation.

 "ethernet": [
            {
                    "select-ports": [
                            "WAN1"
                    ],
                    "speed": 100,
                    "duplex": "half"
            },
            {
                    "select-ports": [
                            "WAN2"
                    ],
                    "speed": 1000,
                    "duplex": "full"
            },
            {
                    "select-ports": [
                            "WAN3"
                    ],
                    "speed": 100,
                    "duplex": "half"
            }
    ],
PreviousSwitchingNextP4

Last updated 3 years ago