OpenWiFi
2.2.0
2.2.0
  • OpenWiFi Release 2.2
  • Ordering OpenWiFi APs
  • Getting Started
    • Cloud Discovery
      • Discovery without Cloud
    • Release 2.0 SDK
      • Deploy using Docker Compose
      • Deploy using Helm
    • Access Points
      • Local Device Settings
  • Provisioning
    • Data Model Introduction
    • Creating a Configuration
  • User Interface
    • Devices
      • Commands
      • Statistics
      • Command History
    • Firmware
  • API
    • OpenAPI Definitions
  • Monitoring
    • ELK Integration
  • Configuration Examples
    • Basic Device Provisioning
      • Bridge Mode SSID
      • NAT Gateway Mode SSID
      • Multi-VLAN SSID
    • Device Feature Configuration Examples
      • DHCP Relay
      • Services
      • Metrics
      • GRE
      • L2TP
      • VxLAN
      • WDS
      • Mesh
      • Captive Portal
        • External Captive Portal
      • ExpressWiFi
      • Roaming RRM and SON
      • RADIUS Authenticated SSID
        • Dynamic VLANs with RADIUS
      • Multi-PSK (MDU Shared Key)
      • Dynamic Air-Time Policy
      • Passpoint®
        • Configuration Introduction
        • Advertising Services
        • Passpoint® Configuration
      • Switching
        • Port Speed
      • P4
Powered by GitBook
On this page
  1. Configuration Examples
  2. Device Feature Configuration Examples

Metrics

TIP OpenWiFi 2.0

Metrics

Several metrics are reported during intervals to the OpenWiFi Gateway. In general metrics contain traffic counters, neighbor tables, discovered clients.

Each OpenWiFi device is capable of sending statistics on SSID, LLDP, and associated Clients learned by the device.

Additionally, OpenWiFi devices expose all 802.11 management data within wifi-frames and to assist network troubleshooting and client fingerprinting solutions OpenWiFi provides dhcp-snooping for all possible client exchanges over DHCP and DHCPv6.

    "metrics": {
        "statistics": {
            "interval": 60,
            "types": [ "ssids", "lldp", "clients" ]
        },
        "health": {
            "interval": 300
        },
        "wifi-frames": {
            "filters": [ "probe",
                "auth",
                "assoc",
                "disassoc",
                "deauth",
                "local-deauth",
                "inactive-deauth",
                "key-mismatch",
                "beacon-report",
                "radar-detected"]
        },
        "dhcp-snooping": {
            "filters": [ "ack", 
                                "discover", 
                                "offer", 
                                "request", 
                                "solicit", 
                                "reply", 
                                "renew" ]
        }

The metrics data is sent to OpenWiFi Gateway at the intervals set where configurable.

Metrics must be associated with the interfaces they are to report on. For example, to send DHCP data from LAN to OpenWiFi Gateway, the following configuration would apply.

        {
            "name": "LAN",
            "role": "downstream",
            "services": [ "ssh", "lldp", "dhcp-snooping" ],
            "ethernet": [
                {
                    "select-ports": [
                        "LAN*"
                    ]
                }
            ],
            "ipv4": {
                "addressing": "static",
                "subnet": "192.168.1.1/24",
                "dhcp": {
                    "lease-first": 10,
                    "lease-count": 100,
                    "lease-time": "6h"
                }
            }
        }
    ],
PreviousServicesNextGRE

Last updated 3 years ago