Features
Last updated
Last updated
Add 6G radio support in Subscriber Portal
Develop RESTAPIs in the provisioning module to configure VLANs on LAN ports on access points
WLAN Security Issues
Bring up files for OAP101
Update to support version 1.0 of state message
Kernel backports from 4.4 for performance
Backport vxlan support
NAPI Threading patch backport
OpenWrt config generation fixes for targets
Kernel oops handling using pstore
update for ipq60xx
update for ipq807x
update for ipq50xx
edgecore eap104 - BDF update
edgecore eap104 - WAN port has no RX
CI for supporting builds from a new next branch
update hfcl wifi 6 boards
test WDS functionality on latest drivier
drop Q14 support as there are no active users
GW should show the AP is in developer mode or not
allow more than one external captive portal definition per AP
OWLS: Update to support the latest version of the Health Check message
Gateway UI: IP address display when AP is behind a NAT router
GW UI: device table column size reductions and standardizations
GW UI: add uptime, GPS location and provisioning status columns to device table
GW UI: commonly used actions should be available with one click in the device table
AP: Add Public IP reporting support in state message
PROV UI: Venue/Entity page layout rework
BSSID MAC address issue in EAP104
2.10 Framework updates
Support multiple S3 providers
add roaming 'auto' button to data model
OWLS UI: theme update
Allow a configurable session timeout for APs
reduce AP WSS Ping timeout to 60
GW UI: theme improvements
PROV UI: theme improvements
Improve sysupgrade to better cover failures
report btime from AP proc stat interface
rtty: allow disabling mTLS for backward GW compatibility
GW UI: add support for device types which include country codes
Add support for APNOS connect reason
GW UI: display device connectReason on device table and page
GW UI: display reboot logs on device page
GW UI: adding VLAN to device statistics display
GWUI should show all AP-RC firmware Images all the time
Add the ability to delete devices in bulk
GW UI: Device FW Upgrade page to include a Toggle Option
Prov UI: Add Push Configuration option next the actions drop menu
Advanced Captive Portal is not working on multiple interfaces
EAP101: unable to configure more than 8 SSIDs
Captive Portal: Radius-Rate-limiting is not applying if the client disconnect and connect back
AP stuck in unaccessible/unrecoverable mode sometimes due to inability of loading config json at boot time
EAP104: BSSIDs are not derived from eth0
API7340: eth0 MAC address doesn't get set properly
Unable to restrict AP after reboot: restrictions.json file is not adding in the /etc/ucentral/ folder
Bad temperature on edgecore 5410
WF196: FTM and qca-diag fail to compile under v5.4 kernel support
a number of APs lost connection with the controller while using v2.9.0
Device serial number is missing in AP events.
multiple APs at same site disconnected from controller and some never recovered
EAP102: Scan for short duration makes client lose Internet connectivity
2.9.0 AP NOS: Radius Request attribute with Hex value not configurable from controller
CIG WF-196 BDF for 6G, CA version is not correct
GW, PROV & SIM UI: cache invalidation not working
Add OpenWiFi support for Cybertan EWW 631 APs
state message doesn't show the vlan interface for dynamic vlan using radius feature
Configurations not retained after Firmware upgrade
Redirecting to incorrect URL instead of PROVUI from GW
Processes hang with CoA DM on RADIUS mac-filter SSIDs
cig wf-660a bringup
Unable to click and choose Custom option for RRM in Prov UI
Not getting all the list of firmwares available for CIGWF196 AP
Certificate problems working with a remotely deployed OW Controller
CIG WF-186w :Set ethernet/wireless mac address
Large number of auto-configuration updates may cause slow GW
Not getting crash or reboot logs in the GWUI
Some stations get zero throughput on 80+ station upload test.
APs Disconnecting and Failing to Renew IP Address
EAP101: loses IP address after dhcp lease time expires
Port enable / disable does n't work correctly on Edgecore EAP 101 AP
Gateway UI showing unordered Firmware Images.
Ratelimit with RADIUS is not working
Datapath: No ping session / traffic is running between wired and wireless client.
Gateway UI: WiFi Analysis Showing Opposite and wrong values(TX/RX) for Upload and Download scenarios
ECW5211 AP radio 0/1 interface down after upgrading to 2.10RC1 image
some configurations appear to prevent metrics reporting in v2.10-rc1
AP is upgrading without signature when sysupgrade: true in the restrictions.json file
Not getting state message data If we have valn Interface
Uable to push config from GW. Error: 1008: Configuration block type invalid.
Cert Portal: Access Denied error trying to load certificate
PROV UI: adding new SSID roaming configuration option
Unable to authenticate client with captive-local-credentials ERROR: Invalid credentials
add pstore/pmsg support
Add Support for HFCL WallPlate WiFi6 model ( HFCL ION4xi_wp )
pstore: make console logging work.
AP: Add Public IP reporting support in state message
CIG WF-186w : mac addr&rtl 8367s switch patch
CIG WF-186w : Update 5G BDF
CIG WF-186w : update uart pin setting for commuciation between ble and soc
CloudSDK GW Service
RADIUS-ACCOUNTING-STOP when AP is disconnected from controller
Multiple captive ssid's are not working with single AP.
Onboarding CIG WF-186W
CIG WF-186w : Add WF-186w support
create ability to capture username/mac mapping during radius authentication
add “cpu” statistics to the metrics collection
GW UI: add ability to change table column order
GW UI: support viewing and searching radius clients
OWLS UI: add support for concurrent simulations